Astel | QF8 – Touchless Drinking Water Fountain

Astel | QF8 – Touchless Drinking Water Fountain

The QF8 Quick-Fill Station delivers a clean quick water bottle fill and enhances sustainability by minimizing our dependency on disposable plastic bottles. Complete cooler and bottle filling station in a consolidated space saving ADA compliant design.

QF8 Quick-Fill Bottle Filler features sanitary no-touch sensor activation with automatic 20-second shut-off timer.

The series has a barrier-free ADA design that meets both adult and child standards. Easy-touch controls are used for simple operation and increased durability.
The QF8 Quick-Fill Water drinking fountain is a bi-level unit with front push buttons.

The QF8 Quick-Fill has self-closing easy touch controls on the front of each unit. Self-contained, wall hung electric refrigerated water cooler. Chilling capacity of 50°F drinking water, based upon 80°F inlet water and 90°F ambient.

All models have a hooded stream projector with easy touch controls that require less than 3 pounds of force to activate commercial-grade solenoid based flow control.
A patented valve with built-in flow regulator provides constant stream from 20 to 105 psi water pressure. The water fountain orifice is fully protected to meet all sanitary codes.

The QF8 Quick-Fill cooler consists of a refrigerated lower unit which requires a water supply, drain outlet, and electrical supply.

Compare

Description

The QF8 – Wall-mounted Touch-less Drinking Water Fountain delivers a clean and quick water bottle fill, and enhances sustainability by minimizing our dependency on disposable plastic bottles.

● Complete cooler and bottle filling station in a consolidated space saving ADA compliant design.
● Bottle Filler features sanitary touch-free sensor activation with an automatic 20-second shut-off timer.
● Quick Fill Rate.
● Built-in 100 micron strainer stops particles before they enter the waterway.
● Waterways Are Lead-Free In Materials & Construction.
● Stainless Steel Top One Piece, Low Flow, Flexible Bubbler Guard.
● Heavy Duty Galvanized Steel Frame.
● High-Efficiency Cooling Tank and Coil.
● Refrigerant R-134a.
● One Push Pad Manual Activation.
● External Stream Height Adjustment on cooler.

Mount: Wall-mounted
Material: 304 Stainless Steel
Finish: Brush Finish Or Mirror Finish
Length: 467mm.
Width: 483mm.
Height: 495mm.
Inlet Pipe: 1/4 In
Waste Pipe: 1-1/4″ Stainless Steel
Faucet: Two Bubblers
ADA: Meets ADA Standards When Properly Installed
Water Supply: Drinking Water
Inlet Water Pressure: 0.1-0.7mpa
Environment Temperature: 5-45℃
Outlet Water Temperature: 3-12°C
Hot Water: Optional
Cold Water: 3-12°C

● Motor Compressor: Hermetically sealed, reciprocating type, 115VAC, 60Hz single phase. Sealed-in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug.
● Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
● Cooling Unit: Combination tube-tank type. Tube portion is continuous coil of copper tubing. Tank is stainless steel. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing material.
● Refrigerant Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free operation.
● Temperature Control: Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements. Easily accessible.
● Frame: Galvanized structural steel chassis supports the refrigeration system and fastens to wall. Provides increased structural integrity and rigidity to cooler.
● Stainless Steel Basin: Type 304, one piece polished to a uniform bright luster finish. Basin has an integral drain grid, embossed bubbler pad. No exposed fasteners.
● Exclusive Flexi-Guard Safety Bubbler: Innovative design utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location to prevent rotation.
● Upper Shroud: Contoured shock-absorbing, provides additional protection against accidental injury. No exposed fasteners.
● Lower Shroud: One piece easy to remove and replace. Allows access to internal components from three sides.
● Cabinet: Cabinet design allows for flush to wall mounting. No recess space is required.
● Color Selection: Gray upper shroud with Stainless Steel lower shrouds.

● Parks.
● Schools, Colleges, And Universities.
● Streets.
● Institutions
● Hospitals and medical facilities
● Offices and businesses
● Other Outdoor Environments Where The Temperature Remains Above Freezing.